Poulan PPB100 User Manual download pdf (Page 7)

ASSEMBLY

W ARNING:

If received assembled,

repeatall steps to ensure your unit is properly

assembled and all fasteners are secure.

Examine parts for damage. Do not use dam-

aged parts.

NOTE:

If you need assistance or find parts

missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the

empty fuel tank.

Finding fuel or oil residue on muffler is normal

due to carburetor adjustments and testing

done by the manufacturer.

INSTALLING TRIMMER ATTACH -

MENT

CAUTION:

When installing trimmer attach-

ment, place the unit on a flat surface for stabil-

ity.

1. Loosen the coupler by turning the knob

counterclockwise.

Coupler

Knob

LOOSEN

TIGHTEN

Shipping

protector

2. Remove shipping protector from coupler.

3. Remove the shaft cap from the trimmer

attachment (if present).

4. Position locking/release buttonof attach-

ment into guide recess of coupler.

5. Push the attachmentinto the coupleruntil

the locking/release button snaps into the

primary hole.

6. Beforeusing theunit, tightenthe knob se-

curely by turning clockwise.

Coupler Primary Hole

Upper

Shaft

Locking/

Release

Button

Lower

Attachment

Guide Recess

W ARNING:

Make sure the locking/

release button is locked in the primary hole

and the knob is securely tightened before op-

erating the unit. All attachments aredesigned

to be used in the primary hole.

For optional attachments, see the AS-

SEMBLY section of the applicable attach-

ment instruction manual.

ATTACHING SHIELD

W ARNING:

The shield must be prop-

erly installed. The shield provides partial protec-

tion from the risk of thrown objects to the opera-

tor and others and is equipped with a line limiter

blade which cuts excess line to the proper

length. The line limiter blade (on underside of

shield) is sharp and can cut you. For proper

orientation of shield, see KNOW YOUR TRIM-

ME R illustrat ion in OPER ATIO N sect ion.

1. Remove wing nut from shield.

2. Insert bracket into slot as shown.

3. Pivot shield until bolt passes throughhole

in bracket.

4. Securely tighten wing nut onto bolt.

Slot

Shield

Wing

Nut

Bracket

Line Limiter Blade

ADJUSTING THE ASSIST HANDLE

W ARNING:

When adjustin g the assist

hand le, be sure it remains above th e safety label

andbelowthemarkorarrowontheshaft.

1. Loosen wing nut on handle.

2. Rotate the handle on the shaft to an up-

right position; retighten wing nut.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Poulan PPB100 User Manual Page 7

Comments to this Manuals

Related products and manuals for Gardening equipment Poulan PPB100