ASSEMBLY
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor, in the operator’s position.
(1)3/8” Wrench
(1) Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO i'*) Wrench
(1)3" or longer Extension
ASSEMBLE YOUR GRASS CATCHER: (^) Wrenches
(1) Short Handle
(1) 1/2" Socket Phillips Screwdriver
(1)9/16" Deep well Socket
A
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in neutral (N) position.
• Place attachment clutch in "DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blade and ail moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
Comments to this Manuals