Poulan 545117550 User Manual download pdf (Page 7)

7

and disconnected from power source when re-

moving jammed material from the tines. Do not

grab or hold attachment by the tines.

WARNING: Rotating tines can cause

serious injury. Keep away from rotating tines.

Stop the unit and disconnect the power source

before unclogging tines or making repairs.

WARNING: Inspect the area to be

cultivated before starting the unit. Remove all

debris and hard and sharp objects such as

rocks, vines, branches, rope, string, etc.

S Hold the unit firmly with both hands

S Keep firm footing and balance. Do not over-

reach or stand on unstable surfaces.

S Look behind and use care when backing up.

S Keep all parts of your body away from the

tines.

S Never operate the cultivator without the tine

guard in place and properly secured.

S Keep the tines and guard clear of debris. Al-

ways wear gloves when servicing or clean-

ing the tines. The tines become very sharp

from use.

S Avoid heavy contact with solid objects that

might stop the tines. If heavy contact oc-

curs, stop the motor and inspect the unit for

damage.

S After striking a foreign object, stop the unit,

disconnect the power source and inspect

the cultivator for damage. Repair before re-

starting.

S Disconnect attachment from the drive mo-

tor before cleaning the tines with a hose and

water to remove any build--up. Oil the tines

to prevent rust.

S Do not run unit at high speed unless culti-

vating.

EDGER SAF ET Y

WARNING: Always use handlebar

when operating edger attachment. Attach

handlebar above arrow on safety label on the

upper shaft (motor end of unit). If your edger

attachment does not include a handlebar, a

handlebar accessory kit (#530071864) is

available from your authorized service dealer.

Instructions for assembling handlebar to your

unit are included in this kit.

Handlebar

DANGER: RISK OF CUT. KEEP

HANDS AND FEET AW AY FROM BLADE

AND CUTT I NG AREA

. Do not attempt to clear

away cut material when the blade is in motion.

Make sure powerhead is stopped and discon-

nected from power source wh en removi ng

jammed material from the cutting blade. Do not

grab or hold unit by the cutting blade.

WARNING: Inspect the area to be

edged before each use. Remove objects

(rocks, broken glass, nails, wire, etc.) which

can be thrown by the blade or can wrap

around the shaft.

S Blade rotates momentarily after the trigger

is released. The blade can seriously cut

you or others.

S Allow blade to stop before removing it from

the cut.

S Hold the unit firmly with both hands.

S Keep firm footing and balance. Do not over-

reach or stand on unstable surfaces.

S Throw away blades that are bent, warped,

cracked, broken or damaged in any other

way. Replace parts that are cracked,

chipped, or damaged before using the unit.

S Keep all parts of your body away from the

blade.

S Keep blade guard in place and in good

working order.

S Always keep the wheel in contact with the

ground.

S Always push the unit slowly over the

ground. Stay alert for uneven sidewalks,

holes in the terrain, large roots, etc.

S To reduce the risk of fire, do not allow exces-

sive grass, leaves, or grease to accumulate

on the attachment.

S Objects struck by the cutting member can

cause serious injuries to persons. The lawn

should always be carefully examined and

cleared of all objects prior to edging.

SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Comments to this Manuals

No comments