OWNER'S MANUALMODEL NUMBER:PP5524ESBSNOW THROWER Always Wear Eye Protection During OperationIMPORTANT MANUAL D
10The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety gla
11OPERATIONDRIVE SPEEDCONTROL LEVERTRACTION DRIVE CONTROL LEVERAUGER CONTROL LEVERTO THROW SNOW (See Fig. 14)The auger rotation is controlled by the a
12ENGINE OILFILL CAP / DIPSTICKFUEL SHUT-OFF VALVEPRIM ERSAFETY IG NI TION KEYTHROT TLECHOKE CONTROLSTARTER BUTTONRECOIL STARTER HANDLEGAS O LINE FILL
13COLD START - ELECTRIC STARTER1. Insert safety ignition key into the ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ig
14MAINTENANCELUBRICATION CHARTGENERAL REC OM MEN DA TIONSThe warranty on this snow thrower does not cover items that have been sub ject ed to operator
15MAINTENANCEV-BELTSCheck V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not ad just abl
16SERVICE AND ADJUSTMENTSWARNING: To avoid serious injury, before performing any service or ad- just ments:1. Be sure throttle is in STOP position.2.
17SERVICE AND ADJUSTMENTSTO REPLACE BELTS (See Fig. 20)The auger and traction drive belts are not adjustable. If the belts are damaged or begin to sli
18STORAGEImmediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.WARNING: Never
19Does not start 1. Fuel shut-off valve (if so 1. Turn fuel shut-off valve to OPEN position.
2Safe Operation Practices for Snow ThrowersIMPORTANT: This machine is capable of amputating hands and feet and throwing objects. Failure to observe t
giving the complete mfg. ID#, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was pu
3PRODUCT SPECIFICATIONSGasoline Capacity 3.5 Quartsand Type: Unleaded Regular onlyOil Type SAE 30 (above 40°F)(API-SF
4PARTS PACKED SEPARATELY IN CARTONMAINTENANCE... 14-15MAINTENANCE SCHEDULE ...
5ASSEMBLY / PRE-OPERATIONRead these instructions and this man u al in its entirety before you attempt to assemble or operate your new snow thrower.You
6ASSEMBLY / PRE-OPERATIONINSTALL AUGER CONTROL ROD (See Figs. 5 and 6)The auger control rod has the short loop on the end of the spring as shown.1.
7ASSEMBLY / PRE-OPERATIONCHECK TIRE PRESSUREThe tires on your snow thrower were overinfl ated at the fac-tory for shipping purposes. Correct and equal
8OPERATIONKNOW YOUR SNOW THROWERREAD THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations wit
9OPERATIONChoke control - used for starting a cold engine.Drive speed control lever - used to select forward or reverse motion and speed of snow throw
Comments to this Manuals